SA-3 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness with this tungsten carbide, technology-not only on a lot more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs are usually applied to ferrous and non-ferrous metals, soft steel, and for all non-metal materials such as stone, plastics, real wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and can look at you through most applications.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined through the material you’re using your burr on. If you happen to be experiencing chipping, you are most probably operating at excessive of speed for the application. Start with a slower speed and increase in the process and soon you achieve the ideal results

Apply light pressure and allow the tool perform the work. Bearing upon the tool will result in reduced tool life as well as a dull burr.

Always wear proper PPE to feature (but not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position on the machine.

Avoid experience electrical power drills; the slower speeds may lead to chipping of your workpiece.
For more details about SA-3 Carbide Burrs explore this web site