SA-3 cylinder shape burrs are good for interior contour work and deburring. Because of the extreme hardness with this tungsten carbide, you can use it on far more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs are usually used on ferrous and non-ferrous metals, soft steel, and for all non-metal materials like stone, plastics, wood floor, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and definately will look at you through most applications.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is determined from the material you’re using your burr on. If you are experiencing chipping, you’re operating at excessive of speed for that application. Start having a slower speed while increasing during this process unless you reach the greatest results

Apply light pressure and allow tool perform work. Bearing upon the tool can lead to reduced tool life as well as a dull burr.

Always wear proper PPE to incorporate (but not limited by) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards in position on your own machine.

Avoid experience electrical power drills; the slower speeds can result in chipping of your respective workpiece.
To learn more about SA-3 Carbide Burrs check out this useful website