1. MANY MATERIALS Can be utilized WITH CARBIDE BURRS
All types of wood, plastics including glass fiber reinforced plastic (GRP), graphite reinforced plastic (CRP), fiberglass, acrylic, and metals like cast iron, aluminum, and steel are among the materials that use tungsten carbide burrs. Carbide burrs use a long lifespan acquiring to break or shattering, causing them to be appropriate for soft metals like silver, platinum, and gold. Titanium, nickel, cobalt, zinc, and also other metals are some of the others.

WHAT APPLICATIONS ARE CARBIDE BURRS Utilized in?
Die grinders, high-speed engravers, and pneumatic rotary tools are examples of air tools that often employ carbide burrs. Other examples are hobby rotary tools, flexible shafts, pendant drills, and micro motors. Make sure to use a handpiece it doesn’t wobble constantly.

THE USES OF CARBIDE BURRS
Carbide burrs are utilized in several fields, including metalworking, dentistry, your vehicle, and aerospace sectors, amongst others. They’re frequently employed in a variety of industries for metalwork like carving, cylinder head porting, grinding, deburring, casting, chamfering, welding, creating jewelry, wood carving, model engineering, and power building.

2. CARBIDE BURR CUT TYPES: SINGLE CUT AND DOUBLE/DIAMOND CUT
Single-cut carbide burrs, often called one flute, will efficiently get rid of the material with a smooth finish if in combination with right-handed spiral flutes. They mostly work with stainless, iron, hardened steel, and ferrous metals like copper and iron. They’re appropriate for heavy stock removal, milling, and deburring.

Conversely, the double-cut carbide burrs, also called cross-cut or diamond-cut due to the two flutes which can be cut across one other, are usually suited for all non-metal materials, including soft steel, aluminum, wood, and ferrous and non-ferrous metals. The finish is smoother using the double-cut carbide burrs than with the only cut simply because they make smaller chips when they remove the material.

3. SHAPES OF CARBIDE BURRS
The cut or profile you want to accomplish will guide your decision in connection with form of carbide burr to use. The various shapes of carbide burrs are the following:

Carbide Ball Burrs
Carbide Inverted Cone Burrs
Carbide Tree Burrs
Carbide Pointed Cone & Ball Nose Burrs; Carbide Round Nose Burrs
Oval Burrs
Cylinder Burrs. End/Ball nose/ Round Nose Cut
Flame Burrs
Countersink Burrs
Oblate Spheroid

4. LIMIT The volume of PRESSURE YOU USE
As with most drill bits and burrs, let the burr do the work and exert gentle pressure; otherwise, the flutes’ cutting edges will chip off or erase too rapidly, shortening the burr’s lifespan.

5. HOW FAST (RPM) In the event you OPERATE THE CARBIDE BURRS?
The speed from which you make use of your carbide burr set in your rotary tool depends upon the form being formed as well as the material to become labored on. However, you should begin slowly and pick up speed as you proceed. Speeds over 35,000 RPM are unacceptable.

6. COMPARED TO HSS BURRS, CARBIDE BURRS ARE STIFFER
Burrs created from high-quality carbides are produced by machine. As Tungsten Carbide is extremely dense (when compared with HSS), it can be suitable for a great deal more difficult projects than HSS. Carbide burrs can also be more heat resistant than HSS, for them to run hotter longer.

For long-term performance, a carbide is usually a preferable option because HSS burrs are going to weaken at higher temperatures.

7. CONTINUOUSLY Slowly move the CARBIDE BURR
Don’t hold your die grinder bit stationary for days when using it. This will stop the burr from poking and burrowing into the material, leaving ugly markings and roughness. To present your hard work a nicer finish, end with the “up” stroke. Soft iron can be easily unclogged with a carbide burr.
More info about cutting burr go our new website